59.4 Network Cables
Connecting two computers directly, with a cable from one Ethernet card to another, requires the use of crossover cables. Connecting computers via a hub or switch or an all-in-one ADSL router requires straight-through cables.
In a little more detail, each Ethernet card has receiver (RX) and transmitter (TX) wires. Each computer’s RX must connect to the other computer’s TX, and vice versa. A crossover cable thus wires RX to TX and TX to RX so that the proper connections are made directly between two network cards. For a hub, switch, or router, the RX/TX exchange is already done within the device so only a straight-through cable is needed. Many single Ethernet ADSL modems have a reversed Ethernet port with RX and TX pre-crossed so that to connect it to a single computer you only need a straight-through cable, as with the usual devices, and not a crossover cable that one might come to expect. When connecting such a modem to a separate hub you will need to plug a straight-through cable from the modem into the uplink port of the hub which should allow for the crossed RX/TX.
Your donation will support ongoing availability and give you access to the PDF version of this book. Desktop Survival Guides include Data Science, GNU/Linux, and MLHub. Books available on Amazon include Data Mining with Rattle and Essentials of Data Science. Popular open source software includes rattle, wajig, and mlhub. Hosted by Togaware, a pioneer of free and open source software since 1984. Copyright © 1995-2022 Graham.Williams@togaware.com Creative Commons Attribution-ShareAlike 4.0